Over-Center Aerial Devices
Hi-Ranger SCM55
Whether you’re replacing an insulator or trimming trees, we have the aerial device equipment you need in a multitude of configurations. Our overcenter aerial devices offer a variety of working heights to meet your needs. They can be mounted on numerous chassis platforms as well. Our aerial device lineup has you covered.
Product Highlights
- Available in three unit sizes (48, 50, & 55 foot)
- Terex® lower boom cylinder design for low travel height
- Patented Tri-Link elbow design for easy maintenance Downloads
Product Documents
Specifications
| Working Height | 60.0 ft (18.3 m) |
| Side Reach | 46.1 ft (14.1 m) |
| Material Handling | Optional |
| Typical Frame Height (FH) | 40 in (101.6 cm) |
| Typical Cab Height (CH) | 108 in (274.3 cm) |
| Offset (O) | 86 in (218.4 cm) |
| Overall Height (OAH) | 10’ 11” (3.3 m) |
| Overall Length (OAL) | 29’ 7” (9.0 m) |
| Unit Length (UL) | 29’ 1” (8.9 m) |
| Center of Rotation (H) | __ |
| Cab to Axle (CA) | 120 in (304.8 cm) |
| Wheel Base (WB) | 188 in (447.5 cm) |
| Front Axle (FA) | 12,000 lb (5,443 kg) |
| Rear Axle (RA) | 19,000 lb (8,618 kg) |
| Gross Vehicle Weight Rating (GVWR) | 31,000 lb (14,061 kg) |
| Recommended Weight for Stability | 26,000 lb (11,793 kg) |
| Frame Section Modulus | 18.0 in3 |
| Frame Yield Strength | 50,000 psi |
| Frame RBM | 900,000 in-lb |